Lay a paraglider out on launch and look at it. It is a sheet of nylon and a heap of thin lines. Nothing in it can stand up on its own. A few seconds after you pull it up, it is a wing that can carry you for hours.
A paraglider has no rigid frame. Thin rods stiffen parts of the wing, but they are not a frame. What holds the shape is air, together with the lines. Here is how that works, and what it looks like on one real flight.
A row of cells
The canopy is sewn as a row of cells, side by side across the span. Most cells have an opening at the front, near the leading edge. The back is closed.
Inside, fabric ribs separate the cells and give each one the shape of a wing section. Holes in the ribs let air pass from cell to cell. That way the pressure spreads along the span.
Air does the stiffening
Air entering the open cells at the leading edge keeps the wing pressurised. Over most of the canopy, the pressure inside is a little higher than the air outside. That difference pushes the fabric outwards and pulls it taut.
A car tyre works the same way. The rubber is soft, and the air inside gives it a firm shape. A gauge tells you how firm. The pressure in a wing is far smaller than in a tyre, but the idea is the same.
The lines do the rest
Pressure alone cannot set the arc of the wing or carry your weight. The lines do that. They hold the canopy in its curve, set the angle of each part of the wing, and take your weight to the risers.
That pressure, together with the lines, holds the wing's shape, and it is never constant. It changes on glide, in turns, in thermals, and with your own inputs.
One flight, from the inside
ParaBaro measures that pressure. Pressure modules on the canopy record it at two points, one on each side of the wing, together with your GPS track.
The figure shows one climb from a beta pilot's flight on 29 July 2026. It runs for just over two minutes. The two lines are the pressure on the left and right sides of the wing. The scale is relative: it shows how the pressure changed, not how large it was.
On the glide, at the left of the chart, the two lines move together. They rise and fall a little, second by second. The air a wing flies through is never perfectly smooth. Both sides of the wing are meeting it in the same way.
Then the pilot finds lift and turns right. The right line drops and stays lower for every circle. The left line stays close to where it was on the glide.
Why the inside wing reads lower
In a turn, the inside wing flies a smaller circle than the outside wing. It moves through the air more slowly, so its cells capture less pressure. They capture even less than the slower speed alone would explain, and we are still working out why.
Lower does not mean empty. The right line keeps rising and falling with the air in every circle. And the wing goes on climbing, circle after circle.
This is one wing, one pilot and one thermal. It shows the pattern clearly. It is not a rule for every wing.
What we do not know yet
We do not yet know how much this pattern differs between wings, pilots and kinds of air. One trace cannot tell us. That is what the 50-pilot beta is for: many pilots, many wings, many flights.
We also see small effects we cannot yet explain. Across this flight, when the pilot climbed in a straight line, both sides of the wing tended to read lower than on the glide. It is too small to see in this chart. We do not know why yet, and we will not guess in print.
Your own wing
Your vario tells you whether you are climbing. ParaBaro also records the pressure inside your wing.
The modules hold through the fabric, and nothing on your wing is modified. After you land, your track and your wing's record are on your pilot dashboard, flight by flight.
If you would like to see your own wing from the inside, the beta is open at aviometrics.com/beta.php.

