ParaBaro v16.0.1 - receiver firmware
====================================

INSTALL
  1. Copy this whole 'firmware' folder to the top level of your SD card.
  2. Put the card in the unit.
  3. Power the unit OFF and ON again. It updates on the way up.

Do this on the ground, before you fly. Never in the air.
Keep both files together and do not rename them - the unit checks the
firmware against its checksum and will refuse to flash without it.

IF IT WILL NOT CONNECT TO THE DASHBOARD AFTERWARDS
  Remove any 'ParaBaro' entry from your computer's Bluetooth settings,
  close the browser, power the unit off and on, and try again. That clears
  a stale pairing, which is worth ruling out first.

  The Devices page keeps showing your previous firmware version until the
  first successful connection. That is not a sign the update failed.

  If it still will not connect, tell us - do not keep retrying.

ONE CHANGE WORTH KNOWING
  This build writes two files per session and only one is your flight.
  Upload flight.csv, not link.csv. If you pick the wrong one the website
  now tells you plainly instead of failing silently.

Anything odd, tell us - however small.
Aviometrics Ltd
